H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 348
327
Figure 315 Creating ACL 202
2.
Configure a permit rule to allow AP 1 with the serial ID 210235A42QB095000761 and a deny
rule to deny AP 2 with the serial ID 210235A42QB095000762.
a.
Select QoS > ACL IPv4 from the navigation tree.
b.
Click the Wireless Setup tab.
c.
Select 202 from the ACL list and add two ACL rules as shown in
.
d.
Click Apply.
Figure 316 Configuring ACL rules
3.
Configure the auto AP function:
a.
Select AP > Auto AP from the navigation tree.
b.
Select Enable for Auto AP.
c.
Select Enable for Authenticate Feature, and Serial ID for Authenticate Method.
d.
Select 202 from the ACL list.
e.
Click Apply.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module