Nbt alg configuration example, Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 312
291
Figure 274 Adding a NAT address pool
4.
Configure dynamic NAT:
a.
Click Add in the Dynamic NAT area.
The Add Dynamic NAT page appears.
b.
Select Vlan-interface2 for Interface..
c.
Enter 2001 for ACL.
d.
Select PAT for Address Transfer.
e.
Enter 1 for Address Pool Index.
f.
Click Apply.
Figure 275 Configuring dynamic NAT
NBT ALG configuration example
Network requirements
As shown in
, a company using the private network segment 192.168.1.0/24 wants to provide
NBT services to the outside.
Configure NAT and ALG on the AC so that Host A uses 5.5.5.9 as its external IP address, the WINS
server uses 5.5.5.10 as its external IP address, and Host B can access the WINS server and Host A by
using host names.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module