Configuring the ac – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 592

571
Figure 595 Adding a user account for device management
Configuring the AC
1.
Configure RADIUS scheme system:
a.
From the navigation tree, select Authentication > RADIUS.
b.
Click Add.
c.
Enter the scheme name system, select the server type Extended, and select the username format
With domain name.
d.
In the RADIUS Server Configuration area, click Add to enter the RADIUS server configuration
page.
e.
Select the server type Primary Authentication, enter 10.1.1.1 as the IP address of the primary
authentication server, 1812 as the port number, and expert as the key, and click Apply to add
the primary authentication server to the scheme.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module