Creating a dynamic address pool for the dhcp, Server – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 223
202
Item Description
DNS Server Address
Enter the DNS server addresses for the client.
To allow the client to access a host on the Internet through DNS, you need to specify
a DNS server address.
Up to eight DNS servers can be specified in a DHCP address pool, separated by
commas.
WINS Server Address
Enter the WINS server addresses for the client.
If b-node is specified for the client, you do not need to specify any WINS server
address.
Up to eight WINS servers can be specified in a DHCP address pool, separated by
commas.
NetBIOS Node Type
Select the NetBIOS node type for the client.
Creating a dynamic address pool for the DHCP server
1.
From the navigation tree, select Network > DHCP.
The default DHCP Server page appears, as shown in
2.
In the Address Pool area, select the Dynamic option to view all dynamic address pools.
3.
Click Add.
Figure 170 Creating a dynamic address pool
4.
Configure the dynamic address pool, as described in
5.
Click Apply.
Table 76 Configuration items
Item Description
IP Pool Name
Enter the name of a dynamic address pool.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module