H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 852
831
Figure 886 Adding an IKE peer
4.
Configure the IKE peer parameters, as described in
.
5.
Click Apply.
Table 272 Configuration items
Item
Description
Peer Name
Enter a name for the IKE peer.
IKE Negotiation Mode
Select the IKE negotiation mode in phase 1, which can be Main or Aggressive.
IMPORTANT:
•
If you configure one end of an IPsec tunnel to obtain an IP address
dynamically, the IKE negotiation mode must be Aggressive. In this case, SAs
can be established as long as the username and password are correct.
•
The specified negotiated mode is used when the local peer is the negotiation
initiator. When acting as the responder, the negotiation mode of the initiator
is used.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module