Enabling a radio, Locking the channel – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 504
483
Enabling a radio
1.
Select Radio > Radio from the navigation tree.
Figure 522 Enabling radio
2.
Select the box of the target radio.
3.
Click Enable.
Locking the channel
1.
Select Radio > Radio from the navigation tree.
Figure 523 Locking a channel
2.
Select the box of the target radio.
3.
Click Lock Channel.
Channel locking takes effect only when the AC adopts the auto mode. For more information
about automatic channel adjustment, see "
If you enable channel locking and then enable the radio, the AC automatically selects an
optimal channel, and then locks the channel.
When the AC detects any radar signals, it immediately selects another channel even if the
current channel is locked, and then locks the new channel.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module