Configuring ac 1 – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 856
835
Configuring AC 1
1.
Configure IP addresses for the interfaces, and assign the interfaces to security zones. (Details not
shown.)
2.
Create ACL 3101:
a.
From the navigation tree, select QoS > ACL IPv4.
b.
Click the Add tab.
c.
Enter the ACL number 3101, and select the match order Config.
d.
Click Apply.
Figure 889 Creating ACL 3101
e.
Click the Advanced Setup tab.
f.
Select the ACL 3101.
g.
Select Permit from the Action list.
h.
Select Source IP Address, and enter 10.1.1.0 and 0.0.0.255 as the source IP address and
mask.
i.
Select Destination IP Address, and enter 10.1.2.0 and 0.0.0.255 as the destination IP address
and mask.
j.
Click Apply.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module