H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 603
582
7.
Enable the wireless service:
a.
On the access service list page, select the wireless service named 802.1x-auth.
b.
Click Enable.
A progress dialog box appears.
c.
After the configuration process is complete, click Close.
Figure 611 Enabling the wireless service
8.
Bind the AP's radio mode with the wireless service:
a.
In the wireless service list, click the
icon for wireless service 802.1x-auth.
b.
Select the AP named ap1 with the radio mode 802.11n(2.4GHz).
c.
Click Bind.
A progress dialog box appears.
d.
After the configuration process is complete, click Close.
Figure 612 Binding the radio mode with the wireless service
9.
Enable 802.11n (2.4GHz):
a.
From the navigation tree, select Radio > Radio.
b.
Select the AP named ap1 with the radio mode 802.11n(2.4GHz).
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module