H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 293)

272
4. Click Apply.
Table 101 Configuration items
Item Description
Interface Name Select an interface to which static NAT is applied.
Enable track to VRRP Configure whether to associate static NAT on an interface with a VRRP group, and
specify the VRRP group to be associated.
When two network devices implement both stateful failover and dynamic NAT, to
ensure normal switchovers between the two devices, you need to add the devices to
the same VRRP group, and associate dynamic NAT with the VRRP group.
VRRP Group
Configuring an internal server
This section describes basic and advanced internal server settings. In the basic configuration page, you
can specify the service type without setting internal ports, which use the default ports of services. In the
advanced configuration page, you need to specify the protocol type and internal ports.
Configuring basic internal server settings
1. From the navigation tree, select Network > NAT.
2. Click the Internal Server tab.
The Internal Server page appears.
Figure 246 Internal server
3. In the Internal Server area, click Add.
The page for adding an internal server appears.