Verifying the configuration, Ap provision configuration example, Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 816
795
Figure 835 Configuring and enabling wireless sniffer
Verifying the configuration
•
Capture AP captures wireless packets and saves the packets to a CAP file in the default storage
medium. Administrators can download the file to the PC and get the packet information by using
tools such as Ethereal.
•
When the total number of captured packets reaches the upper limit, Capture AP stops capturing
packets.
AP provision configuration example
Network requirements
Configure AP provision on AC 1 to assign the following network settings to AP 1 and AP 2:
•
IP address 2.2.2.1/24 for AC 1 so that AP 1 and AP 2 can discover AC 1.
•
IP address 1.1.1.1/24 for AP 1 and IP address 1.1.1.2/24 for AP 2.
•
Username test and password test for AP 1 and AP 2 when they operate as 802.1X clients.
•
Authentication method peap-mschapv2.
•
802.1X client function for Ethernet interfaces on AP 1 and AP 2.
Figure 836 Network diagram
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module