Displaying snmp packet statistics, Snmpv1/snmpv2c configuration example, Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 162: Configuring the ac (snmp agent)
141
Displaying SNMP packet statistics
1.
Select Device > SNMP from the navigation tree.
The page for displaying SNMP packet statistics appears.
Figure 100 SNMP packet statistics
SNMPv1/SNMPv2c configuration example
Network requirements
As shown in
, the NMS (1.1.1.2/24) uses SNMPv1 or SNMPv2c to manage the AC (1.1.1.1/24),
and the AC automatically sends traps to report events to the NMS.
Figure 101 Network diagram
Configuring the AC (SNMP agent)
1.
Enable SNMP agent:
a.
Select Device > SNMP from the navigation tree.
The page in
appears.
b.
Select the Enable option.
c.
Select the v1 and v2c boxes, as shown in
1.1.1.2/24
AC
Agent
NMS
Vlan-int2
1.1.1.1/24
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module