P.2 related documents from cirrus logic, P.3 reference documents, P.4 notational conventions – Cirrus Logic EP93xx User Manual

Page 25

DS785UM1

P-3

Preface

EP93xx User’s Guide

Note:

“X” means Function is included; “-” means Function is not included

P.2 Related Documents from Cirrus Logic

1. EP9301 Data Sheet, Document Number - DS636PP5

2. EP9302 Data Sheet, Document Number - DS653PP3

3. EP9307 Data Sheet, Document Number - DS667PP4

4. EP9312 Data Sheet, Document Number - DS515PP7

5. EP9315 Data Sheet, Document Number - DS638PP1

P.3 Reference Documents

1. ARM

920T Technical Reference Manual, ARM Limited

2. AMBA Specification (Rev. 2.0), ARM IHI 0011A, ARM Limited

3. AHB Example AMBA System (Addendum 01), ARM DDI 0170A, ARM Limited

4. The co-processor instruction assembler notation can be referenced from ARM

programming manuals or the Quick Reference Card, document number ARM QRC
0001D, ARM Limited

5. The MAC engine is compliant with the requirements of ISO/IEC 8802-3 (1993), Sections 3

and 4

6. OpenHCI - Open Host Controller interface Specification for USB, Release 1.0a;

Compaq

, Microsoft

, National Semiconductor

7. ARM Co-processor Quick Reference Card, document number ARM QRC 0001D, ARM

Limited

8. Information Technology, AT Attachment with Packet Interface - 5 (ATA/ATAPI-5) ANSI

NCITS document T13 1321D, Revision 3, 29 February 2000

9. ARM PrimeCell PL190-Rel1v1 Revision 1.7 Technical Reference Manual DDI0181C,

ARM Limited

10.Audio Codec ‘97, Revision 2.3, April 2002, Intel

Corporation

P.4 Notational Conventions

This document uses the following conventions:

• Internal and external Signal Names, and Pin Names use mixed upper and lower case

alphanumeric, and are shown in bold font, for example, RDLED

• Register Bit Fields are named using upper and lower case alphanumeric: for example,

SBOOT, LCSn1