Rec ipe func tion – IDEC High Performance Series User Manual
Page 937
![background image](/manuals/350385/937/background.png)
WindO/I-NV2 User’s Manual
18-11
3 Recipe Settings Dialog Box
18
R
ec
ipe
Func
tion
■
Trigger Setting
Selects the operation using the data for the recipe.
■
Read Trigger
Specifies the device that triggers batch reading device values and saving them to the memory card as a recipe file.
Click
to display the Device Address Settings dialog box. For the device address configuration procedure, refer
to Chapter 2 “5.1 Device Address Settings” on page 2-67.
This option can only be configured when Read/Write or Read-only is selected under Trigger Setting.
■
Write Trigger
Specifies the device that triggers batch writing recipe values to devices by block.
Click
to display the Device Address Settings dialog box. For the device address configuration procedure, refer
to Chapter 2 “5.1 Device Address Settings” on page 2-67.
This option can only be configured when Read/Write or Write-only is selected under Trigger Setting.
■
Monitoring Period
Shows the period to monitor the write device and the read device. This period is for detecting alarms so it is the same
as the period to monitor device states. This option is configured on the General tab in the Alarm Log Settings
dialog box.
Read/Write:
Saves batch read device values to the memory card as a recipe file and writes them to
devices as recipe values.
This option can only be configured when Memory Card is selected under Access to.
Read-only:
Saves batch read device values to the memory card as a recipe file.
This option can only be configured when Memory Card is selected under Access to.
Write-only:
Writes recipe values to devices.
Each bit of the word device configured by the read trigger corresponds to a channel.
When a bit changes from 0 to 1, a read to the device is executed.
Example: When the block 1 read trigger is specified as LDR 0000
LDR 0000-0 corresponds to channel 1-0, LDR 0000-1 to channel 1-1, through to LDR 0000-15
which corresponds to channel 1-15.
bit
bit
Channel 1-0
15
0
LDR 0000
Channel 1-15
Each bit of the word device configured by the write trigger and the read trigger corresponds to a channel.
When a bit changes from 0 to 1, a write to the device is executed.
Example: When the block 1 write trigger is specified as LDR 0000
LDR 0000-0 corresponds to channel 1-0, LDR 0000-1 to channel 1-1, through to LDR 0000-15
which corresponds to channel 1-15.
bit
bit
Channel 1-0
15
0
LDR 0000
Channel 1-15
• When recipe values are batch written to devices with Access to set to Memory Card and Trigger Setting
set to Read/Write or Write-only, if no recipe file exists in the “RECIPE” folder in the memory card folder
on the memory card, 0 is written to all the devices.
• If device value reads and recipe value writes occur simultaneously, first the device values are read, then the
recipe values are written.