IDEC High Performance Series - Manual (Page 561)

WindO/I-NV2 User’s Manual 10-49
3 Picture Display
10
Data Displa
ys
●
View Tab
■ Picture List
Registers the pictures to display on the Picture Display. The picture number (Pic number) and the file name of the
registered picture are displayed in the list.
*1 Advanced mode only
Pic number
Set: Registers a picture to the list. If you select a Pic number with a picture that is already registered, that
number is overwritten with the new picture.
Select a Pic number on the list and click this button to display Picture Manager. Specify the picture to
register with Picture Manager.
Insert: Inserts the picture in the position selected on the list.
Select the Pic number on the list at the position to insert the picture and click this button to display Picture
Manager. Specify the picture to insert. The picture at the insertion point shifts one Pic number down. The
picture cannot be inserted when pictures are registered to all the Pic numbers.
Remove: Deletes the registered picture from the list.
Select a Pic number on the list and click this button to delete the selected picture from the list.
Up: Shifts the selected settings upward in the list.
Down: Shifts the selected settings downward in the list.
Recover Background *1 :
Select this check box to recover the background of the area where the picture had been displayed after the
picture is switched. When this check box is cleared, the background is filled with the screen's Background
Color.
When parts or drawings are arranged so they overlap the background of the Picture Display (below), the
background of parts and drawings is displayed as follows if the Picture Display picture is hidden.
For the HG2G-5F and the HG3G/4G, the function to recover the background is always enabled, so this item
is not displayed. However, when the background part is the Alarm List Display, Alarm Log Display, Bar
Chart, Line Chart, or Pie Chart, the missing sections will remain.
Picture Display
Check box cleared Check box selected
Drawing
The screen is filled with
Background Color, so
background parts and
drawings are missing.
Since background parts
and drawings are redrawn,
they return to their
original state.