IDEC High Performance Series - Manual (Page 234)

3 Project Settings Dialog Box
4-48 WindO/I-NV2 User’s Manual
●
Host I/F Network Settings Dialog Box
To communicate with an external device via Ethernet communication, specify the Ethernet settings for the destination
external device (IP address, port number). The settings other than IP Address and Port vary based on the external
device. For details, refer to the External Device Setup Manual.
Example: MODBUS/TCP Client is selected for Host I/F Driver
■ IP Address
Specifies the IP address of the destination external device.
The format is “xxx.xxx.xxx.xxx”. “xxx” stands for a numeric value from 0 to 255.
When connecting multiple devices to the same network, make sure to assign each device a unique IP address.
■ Port
Specifies the port number (0 to 65,535) of the destination external device.