IDEC High Performance Series - Manual (Page 209)

WindO/I-NV2 User’s Manual 4-23
1 Creating and Manipulating WindO/I-NV2 Project Data
4
Project Set
tings
3 Check the message and click OK.
The Destination path for Convert dialog box is displayed.
4 Specify the saved location and file name, and then click Save.
The data conversion process begins.
5 When the data is finished being converted, click Close.
If there are no devices that correspond to the host device used in the current project data after changing
the host I/F driver, the items set with those devices are blank.