IDEC WindSRV User Manual
Kepserverex5 help
Table of contents
Document Outline
- Server Help
- Getting Started
- Standard Features
- Server Administration
- Tag Management
- Communications Management
- Built-In Diagnostics
- Basic Server Components
- Designing a Project
- Server Options
- Configuring from FIX Applications
- Project Preferences
- How Do I...
- How Do I...
- Use DDE with the Server
- Use NetDDE Across a Network
- Use Dynamic Tag Addressing
- Process Array Data
- Create and Use an Alias
- Use an Alias to Optimize a Project
- Optimize the Server Project
- Select the Correct Network Cable
- Use Ethernet Encapsulation
- Resolve Comm Issues When the DNS/DHCP Device Connected to the Server is Power Cycled
- Error Messages
- Error Descriptions
- Server Runtime Error Messages
- Server Runtime Error Messages
- '
' device driver was not found or could not be loaded - '
' Server Started - '
' successfully configured to run as a system service - '
' successfully removed from the service control manager database - Attempt to add DDE item '
- ' failed
- Attempt to add FastDDE/SuiteLink item '
' failed - Attempt to add OPC Client item '
- ' failed
- Attempting to automatically generate tags for device '
' - Auto generation for tag '
' already exists and will not be overwritten - Auto generation produced too many overwrites, stopped posting error messages
- Completed automatic tag generation for device '
' - Configuration session assigned to '
' as Default User has ended - Configuration session assigned to '
' demoted to Read Only - Configuration session assigned to '
' promoted to Write Access - Configuration session started by '
' - Configuration TCP/IP port number changed to '
' - Data collection is '
' on device ' ' - DDE client attempt to add topic '
' failed - Delete object '
- ' failed
- Demo timer started. '
' ' ' ' ' ' ' - Demo timer updated. '
- Demonstration time period has expired
- Demonstration time period has expired
- Device '
' has been auto-demoted - Device '
' has been auto-promoted to determine if communications can be re-established - Failed to upload project XML
- FLEXnet Licensing Service must be enabled to process your license
- Module '
' is unsigned or has a corrupt signature. Runtime references are limited to demo operation - Move object '
' to ' ' failed - No device driver DLLs were loaded
- Rejecting attempt to delete referenced object '
- '
- Rejecting attempt to move referenced object '
- '
- Runtime project replaced from '
' - Simulation mode is '
' on device ' ' - Starting '
' device driver - Starting '
' plug-in - Stopping '
' device driver - Stopping '
' plug-in - The tier information for feature '
' is invalid - Unable to generate a tag database for device '
'. Reason: ' ' - Unable to generate a tag database for device '
'. The device is not responding - Unable to load project '
' - Unable to write to item '
- '
- Update of object '
- Write request rejected on item reference '
- ' since the device it belongs to is disabled
- Write request rejected on Read Only item reference '
- '
- Server Configuration Error Messages
- Server Configuration Error Messages
- '
' device driver loaded successfully - '
' device driver unloaded from memory - '
' device driver was not found or could not be loaded - '
' driver does not currently support XML persistence - '
' plug-in was not found or could not be loaded - A client application has '
' auto-demotion on device ' ' - Closing project '
' - Created backup of project '
' to ' ' - Duplicate Channel Wizard page ID '
' detected - Error importing CSV tag record '
': ' ' is not a valid tag group name - Error importing CSV tag record '
': ' ' is not a valid tag name - Error importing CSV tag record '
': Missing address - Error importing CSV tag record '
': Tag or group name exceeds 256 characters - Failed to reset channel diagnostics
- Failed to retrieve runtime project
- Invalid Ethernet encapsulation IP '
' - Invalid or missing modem configuration on channel '
' - Invalid XML document '
' - Maximum channel count exceeded for the lite version '
' driver license - Maximum device count exceeded for the lite version '
' driver license - Maximum runtime tag count exceeded for the lite version '
' driver license - Modem initialization failed on channel '
' - Opening project '
' - Required schema file '
' not found - Runtime project update failed
- Starting OPC diagnostics
- Stopping OPC diagnostics
- Unable to add channel due to driver-level failure
- Unable to add device due to driver level failure
- Unable to backup project file to '
' - Unable to backup project file to '
' - Unable to launch OPC Quick Client [Path: '
' OS Error: ' '] - Unable to load driver DLL '
' - Unable to load the '
' driver because more than one copy exists (' ' and ' ') - Unable to use network adapter '
' on channel ' '. Using default network adapter - Validation error on '
': Invalid scaling parameters
- General Operation System Error Messages
- General Operation System Error Messages
- , Error control
- , Forced error control
- , Hardware flow control
- , Software flow control
- Dialing '
' on line ' ' - Dialing aborted on '
' - Dialing on line '
' cancelled by user - Failed to open modem line '
' [TAPI error] - Hardware error on line '
' - Incoming call detected on line '
' - Line '
' connected - Line '
' connected at ' ' baud - Line '
' disconnected - Line '
' is already in use - Line dropped at remote site on '
' - Modem line closed: '
' - Modem line opened: '
' - Modem to Modem DCE: '
' - MODEMSETTINGS unavailable
- No comm handle provided on connect for line '
' - No dial tone on '
' - Remote line is busy on '
' - Remote line is not answering on '
' - TAPI configuration has changed, reinitializing...
- TAPI line initialization failed: '
' - The phone number is invalid '
' - Unable to apply modem configuration on line '
' - Unable to dial on line '
' - Unable to start NETDDE
- iFIX Error Messages