IDEC High Performance Series - Manual (Page 1265)

WindO/I-NV2 User’s Manual 30-21
1 Memory Cards
30
External Memory Devices
SD memory card
1 Insert the SD memory card into the MICRO/I.
2 Press and hold the upper left corner of the MICRO/I screen for 3 or more seconds.
The Maintenance Screen appears.
3 Press System Mode.
MICRO/I switches to System Mode.
4 Press Offline.
The System Menu appears.
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
HG3G HG2G-5F HG4G
SD Memory Card
MICRO/I
HG3G HG2G-5F HG4G
Press and hold 3
or more seconds
MICRO/I
Maintenance
System Mode
Device Monitor
Adjust Brightness
If security is enabled for the project on MICRO/I, a dialog appears for you to enter a user name and
password. For details, refer to Chapter 23 “User Accounts and the Security Function” on page 23-1.
Run Simulate Offline
<< >> BRIGHTNESS 31
MAC Address 00:03:7B:F0:12:A8
2010/OCT/14/THU 14:56:44
IDEC HG G SERIES
SYSTEM MODE TOP PAGE
ENG/JPN