IDEC High Performance Series User Manual
Page 560
![background image](/manuals/350385/560/background.png)
3 Picture Display
10-48
WindO/I-NV2 User’s Manual
■
Flash
Select this check box to flash the displayed pictures.
■
Dynamic Position
Select this check box to move and display the picture by specifying the coordinates of the picture as values of devices.
■
Dynamic Size
Select this check box to scale the picture by specifying the size of the picture as values of devices.
*2 Advanced mode only
X Point: Specifies the word device that is the X-coordinate of the picture.
Click
to display the Device Address Settings dialog box. For the device address configuration
procedure, refer to Chapter 2 “5.1 Device Address Settings” on page 2-67.
Y Point: Specifies the word device that is the Y-coordinate of the picture.
Click
to display the Device Address Settings dialog box. For the device address configuration
procedure, refer to Chapter 2 “5.1 Device Address Settings” on page 2-67.
Example: When the X-coordinate is D 100 and the Y-coordinate is D 101
The picture is moved to the values of D 100 and D 101.
0
0
300
250
600
500
Position of picture to display
Y-coordinate device D 101 value
X-coordinate device D 100 value
0
0
300
250
600
500
Width: Specifies the word device that is the width of the picture.
Click
to display the Device Address Settings dialog box. For the device address configuration
procedure, refer to Chapter 2 “5.1 Device Address Settings” on page 2-67.
Height: Specifies the word device that is the height of the picture.
Click
to display the Device Address Settings dialog box. For the device address configuration
procedure, refer to Chapter 2 “5.1 Device Address Settings” on page 2-67.
Example: When the width device is D 100 and the height device is D 101
The picture is displayed with its size scaled to the values of D 100 and D 101.
When the size of pictures to switch differs and the Dynamic Size check box is cleared, all the pictures are
displayed with the same size as Pic0.
When moving and scaling pictures, set the values of devices so the picture is not moved or scaled outside
the screen's display area.
180
120
360
240
720
480
180
120
360
240
720
480
Size of picture to display
Height device D 101 value
Width device D 100 value