IDEC High Performance Series User Manual
Page 1250
1 Memory Cards
30-6
WindO/I-NV2 User’s Manual
Communication settings
Follow these procedures to configure the communication device and port to allow reading and writing to the memory
card inserted in the MICRO/I.
1
On the Home tab, in the Project group, click Comm. Setup.
The Communication Settings dialog box appears.
2
Select MICRO/I under Communicate with.
3
Select the type of connection under Port, then click OK.
Downloading
This procedure shows how to download a specified file into a folder on the memory card for the currently running
project.
1
On the Home tab, in the Project group, click the arrow under Download.
2
Click Data to Memory Card or Data to Memory Card while running.
The File Open dialog box appears.
■
Data to Memory Card
This function temporarily stops the MICRO/I and then downloads files to the memory card inserted in the MICRO/I.
MICRO/I resumes running when files have been downloaded.
■
Data to Memory Card while running
This function downloads files to the memory card inserted in the MICRO/I without stopping the MICRO/I.