IDEC High Performance Series - Manual (Page 1322)

1 HG2G-S/-5S
34-6 WindO/I-NV2 User’s Manual
1.5 Specifications
■ Applicable Standards
■ Environmental Specifications
■ Electrical Specifications
■ Construction Specifications
Type No. HG2G-S HG2G-5S
Safety Standard
UL508, UL1604,
CSA C22.2 No.142 (c-UL),
CSA C22.2 No.213 (c-UL)
UL508,
CSA C22.2 No.142 (c-UL)
EMC Standard IEC/EN 61131-2:2007 IEC/EN 61131-2:2007
Operating Ambient Temperature 0 to 50°C
Operating Relative Humidity 10 to 90% RH (no condensation)
Storage Ambient Temperature -20 to +60°C
Storage Relative Humidity 10 to 90% RH (no condensation)
Altitude (Operation) 0 to 2000m
Pollution Degree 2
Corrosion Immunity Free from corrosive gases
Type No. HG2G-S HG2G-5S
Rated Operating Voltage
HG2G-S*22 : 24V DC
HG2G-S*21 : 12V DC
12V DC / 24V DC
Power Consumption 10W maximum 8W maximum
Power Voltage Range
HG2G-S*22 : 20.4V DC to 28.8V DC
HG2G-S*21 : 10.2V DC to 18.0V DC
10.2V DC to 28.8V DC
Allowable Momentary Power
Interruption
10 ms maximum 10 ms maximum
Inrush Current
HG2G-S*22 : 20A maximum
HG2G-S*21 : 40A maximum
40A maximum
Dielectric Strength AC1000V, 10mA, 1 minute (between power and earth terminals)
Insulation Resistance 50 MΩ minimum (500V DC megger) (between power and earth terminals)
Vibration Resistance
5 to 8.4Hz amplitude 3.5mm,
8.4 to 150Hz acceleration 9.8m/s
2
10 times on each of three mutually perpendicular axes (100 minutes)
(IEC61131-2)
Shock Resistance
147m/s 2 , 11ms (5 shocks on each of three mutually perpendicular axes)
(IEC61131-2)