IDEC High Performance Series - Manual (Page 839)

WindO/I-NV2 User’s Manual 14-1
14
Data Log Function
This chapter describes how to configure the Data Log function and its operation on the MICRO/I.
1.1 How the Data Log Function is Used
The Data Log function samples values of devices with the MICRO/I using the configured sampling condition. The
sampled values of devices are saved in internal memory along with the sampling time.
The Data Log function can perform the following functions.
• Sample values of devices at a fixed interval
• Sample values of devices when a value of device change
• Output Data Log data to the memory card
Chapter 14
Data Log Function
1 Overview
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
MICRO/I
Host
D100 : 123
D100 : 55
12 : 00
12 : 05
12 : 10
D100 : 0
MICRO/I
Host
D100 : 123
0 1
HG3G HG2G-5F HG4G
SD Memory Card
HG2F HG3F HG4F
CF Card
Output to memory card
Data Log data (CSV)
Output to memory card
Data Log data (CSV)
MICRO/I
MICRO/I
This function is only supported by models that are equipped with the memory card interface.