IDEC High Performance Series - Manual (Page 1043)

WindO/I-NV2 User’s Manual 22-11
2 Multimedia Function Configuration Procedure
22
Multimedia Function
2.3 Configuring the Video Input
1 On the Configuration tab, in the System Setup group, click Multimedia.
The Multimedia Settings dialog box is displayed.
2 Click the Video Input tab.
3 Select NTSC or PAL for the signal standard of the device connected to the MICRO/I.
4 Click OK.
The Multimedia Settings dialog box closes.
This concludes configuring the video input.
The adopted format for the signal standard differs according to the country or region.
NTSC:
Japan, Korea, Taiwan, North America, Central America, South America, others
PAL: Europe, China, the Middle East, South East Asia, others