IDEC High Performance Series - Manual (Page 349)

WindO/I-NV2 User’s Manual 8-25
2 Word Button
8
Bu
tton
s
■ Destination Device
*1 Advanced mode only
Destination Device: Specify the destination word device.
Click to display the Device Address Settings dialog box. For the device address
configuration procedure, refer to Chapter 2 “5.1 Device Address Settings” on page 2-67.
Use Reference Device *1 : Select this check box and specify a device to change the destination word device according
to the value of the specified device.
This setting is enabled only if Action Mode is set to Move.
For details, refer to Chapter 2 “Indirect Read and Indirect Write Settings” on page 2-5.
Write *1 Specify the number of word devices (1 to 64) at the destination.
For Move, specify how many times to write.
This setting is enabled only if Action Mode is set to Set, Momentary, Alternate, or
Move.
Example: If Data Type is set to BIN16(+) and Write is set to 5, the same data will be
written to 5 continuous word addresses.
Example: If Data Type is set to BIN32(+) and Write is set to 5, the same data will be
written to a total of 10 word addresses (2 words 5 times).
:
Destination Device: LDR10
Write: 5
Data Type: BIN16(+)
Source Data: 12345
12345 LDR10
12345 LDR11
12345 LDR12
12345 LDR13
12345 LDR14
5 words
Destination Device: LDR10
Write: 5
Data Type: BIN32(+)
Source Data: 987654
LDR10
987654
LDR11
LDR12
987654
LDR13
LDR14
987654
LDR15
LDR16
987654
LDR17
LDR18
987654
LDR19
10 words