IDEC High Performance Series - Manual (Page 924)

4 Using the Data
17-16 WindO/I-NV2 User’s Manual
14 On the Channel tab, under Source Device Type, select Bit and specify Number of Blocks.
15 Select the channel number to register the level 1 report device to and click Edit.
The Individual Settings dialog box is displayed.
16 Specify the level 1 report device in Source and select No Store under Data.
Set Source to the level 1 report device configured on the Operation Time tab in the Preventive Maintenance
settings Individual Settings dialog box.
17 Select Enable under Alarm function, select NO under NO/NC, and click OK.
You are returned to the Alarm Log Settings dialog box.