IDEC High Performance Series - Manual (Page 1123)

WindO/I-NV2 User’s Manual 24-31
6 System Information
24
Online F
unction
Displays information about the runtime system and downloaded project data of the MICRO/I.
This function can be used to show information about project data during editing and to simultaneously check details
of project data downloaded to the MICRO/I.
6.1 Displaying System Information
1 Change communication settings according to the connection method between the computer and the MICRO/I.
If communicating with a MICRO/I inserted in a computer, in the Communication Settings dialog box, select MICRO/I
from Communicate with. To communicate with the MICRO/I as an O/I Link Slave via an O/I Link Master, select
O/I Link Slave. For details, refer to “1.3 Change Communication Settings” on page 24-6.
2 On the Home tab, in the Project group, click Target Info..
• When Communicate with is set to MICRO/I and Port is set to USB or Serial, the System Information dialog
box is displayed.
• When Communicate with is set to MICRO/I and Port is set to Ethernet, the Target IP Address dialog box is
displayed. Specify the IP address of the MICRO/I, and then click OK to display the System Information dialog box.
For details, refer to “To execute any function except project data download” on page 24-9.
• When Communicate with is set to O/I Link Slave, the Target Slave dialog box is displayed. Specify the slave
station of the MICRO/I to communicate with, and then click OK to display the System Information dialog box.
If Port is set to Ethernet, specify the IP address of the master to be used. If Port is Ethernet and the via Web
Server Unit check box is selected, specify the port number of the Web Server Unit connected to the destination
MICRO/I. For details, refer to “To execute any function except project data download” on page 24-11.
6 System Information
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
While editing project data, information about runtime system and project data can be displayed even by
clicking Target Info. in the Touch Screen group on the Online tab.
If security is enabled in the MICRO/I project, the Password Screen is displayed. Enter the password.
For details, refer to Chapter 23 “User Accounts and the Security Function” on page 23-1.