IDEC High Performance Series - Manual (Page 1127)

WindO/I-NV2 User's Manual 25-1
25
Monitor F
unction
This chapter describes the monitor function that checks operation of the created project data.
Monitor function enables the values of internal devices and the values of external devices to be checked and changed.
This can be done in two ways: using WindO/I-NV2 on a computer connected to the MICRO/I, or directly on the screen
of the MICRO/I.
1.1 How the Monitor Function in WindO/I-NV2 is Used
Monitor function in WindO/I-NV2 can be performed as follows.
• Checking values of devices used on the screen of the MICRO/I
• Checking values of specified devices
• Checking values of devices of sequential addresses
Chapter 25
Monitor Function
1 Monitoring with WindO/I-NV2
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
Computer
MICRO/I
130
External device
Screen Monitor
LDR1
LM0
Displays device addresses used in a screen.
LDR1
LM0
Computer
MICRO/I
130
External device
Custom Monitor
Select device address
Computer
MICRO/I
130
External device
Batch Monitor
SequenƟal addresses
LM0
LM1
LM2
Length: 3
(Starting address)