IDEC High Performance Series - Manual (Page 1097)

WindO/I-NV2 User’s Manual 24-5
1 Communicating with the MICRO/I
24
Online F
unction
●
Ethernet cable connection
The computer must be equipped with an Ethernet port.
*3 This is applicable for models with Ethernet interface only.
Computer
Ethernet cable
To Ethernet port To Ethernet interface
MICRO/I
HG3F HG4F
HG3G HG2G-5F HG4G
HG2G-5S HG2G-S
*3 *3
Computer
MICRO/I
Ethernet cable Serial cable
Web Server Unit
HG2F HG2S
HG1F HG2G-S
To Ethernet port To Ethernet interface To serial port To Serial Interface 2
It is necessary to configure the MICRO/I according to the local network that is used.
On the Communication Interface tab in the Project Settings dialog box, specify the IP address, subnet
mask, and default gateway, and clear the Forbid Maintenance Communication check box. For details,
refer to Chapter 4 “3.2 Communication Interface Tab” on page 4-36.