IDEC High Performance Series - Manual (Page 1057)

WindO/I-NV2 User’s Manual 23-7
1 Overview
23
Use
r Ac
counts and the Sec
urit
y Function
●
Operations Subject to Password Protection
If you configure a password for a user account assigned to a security group to protect access to data, access to data
is password protected. The operations that are subject to password protection and the security group that the
password is valid for are as follows.
*1 External memory inserted into the MICRO/I (HG2G-5F, HG3G/4G, HG2F/3F/4F only)
*2 HG2G-5F, HG3G/4G only
*3 HG3F/4F only
Operations subject to password protection
Security group that the password is valid for
Administrator Operator Reader
Data editing
Opening projects YES NO NO
Reusing screens YES NO NO
Modifying data
Downloading project data YES NO NO
Downloading PLC programs *2 from external
memory *1 to hosts
YES NO NO
Downloading data to external memory *1 YES NO NO
Downloading data to external memory *1 while the
MICRO/I is running
YES YES NO
Uploading project data YES NO NO
Uploading PLC programs *2 from hosts to external memory *1 YES NO NO
Uploading external memory data *1 YES YES YES
Deleting all data YES NO NO
Deleting external memory data *1 YES NO NO
Formatting external memory *1 YES NO NO
Switching to the system menu YES NO NO
Displaying Device Monitor YES YES NO
Copying files from a USB flash drive to an SD memory card *1 YES YES NO
Copying files from an SD memory card to a USB flash drive *1 YES YES YES
Executing the USB Autorun function *2 YES NO NO
Remotely monitoring the MICRO/I state from a web
browser terminal
*2
YES YES YES
Remotely operating the MICRO/I state from a web
browser terminal
*2
YES YES NO
Opening Device Monitor on a web browser terminal
and reading device values
*3
YES YES YES
Opening Device Monitor on a web browser terminal
and changing the values of internal devices
*3
YES YES NO
• For the HG2G-S/-5S/-5F and the HG3G/4G, you can set a dedicated password. In the Security dialog
box, on the Options tab, select the Use Password to open a Project check box, and then set the
password. The dedicated password is applicable to the following operations:
- Opening projects
- Reusing screens
- Opening projects after uploading project data
- Opening projects after uploading data on external memory
*1
• To password protect operations, the lowest level security group out of the security groups enabled with a
password must be assigned to a user account.
The security levels, from highest to lowest, are Administrator > Operator > Reader.
Example: To password protect the operation to display Device Monitor, assign the Operator security
group to a user account. If a user account assigned to the Operator security group does not
exist, the operation is not password protected.