IDEC High Performance Series - Manual (Page 783)

WindO/I-NV2 User’s Manual 12-47
6 Multi-Command
12
Commands
Properties of Print for Multi-Functions dialog box
Sets the Print command for the Multi-Command.
■ Command Name
Enter a name for the command. The maximum number is 20 characters.
■ Output to
Select where to direct the screenshot to.
■ Action Mode
Select the behavior of the button from the following:
■ Print Time stamp
Adds the date and time of printing to the screenshot before sending it to the printer.
The date and time format depends on the language selected in Language. Language is available on the Project
Details tab of the Project Settings dialog box.
The display formats are shown below:
YYYY: year, MM: month, DD: day, HH: hour, MM: minute
*2 This is applicable for models with the memory card interface only.
*3 Only last two digits of year shown on the HG1F/2F/2S/3F/4F.
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
Printer: Outputs the screenshot to the printer connected to the MICRO/I.
Memory Card *2 : Outputs the screenshot as a file to the memory card inserted in the MICRO/I.
Files are output as follows:
Series File format File name File size
HG2G-5F
HG3G/4G
JPEG
CAP***.JPG (***: date and time when file was
output)
Example: A file created at 18:50:25 on June 30, 2011
will be named “CAP110630_185025.JPG”.
Depends on image
being displayed.
HG2F
Bitmap CAP***.BMP (***: serial number from 001 to 999)
77,878 bytes
HG3F 308,278 bytes
HG4F 481,078 bytes
• For details about printers, refer to Chapter 31 “Printer” on page 31-1.
• For details about memory cards, refer to Chapter 30 “1 Memory Cards” on page 30-1.
Print Screen: Outputs a screenshot of the current screen to the printer or the memory card.
Cancel Printing: Cancels printout to the printer.
• Japanese: YYYY *3 MM/DD HH:MM
• English: MM/DD/YYYY *3 HH:MM