IDEC High Performance Series - Manual (Page 1152)

2 Monitoring on the MICRO/I
25-26 WindO/I-NV2 User's Manual
For the HG1F/2F/2S/3F/4F
1 Press the upper-left corner of the HG1F screen for three seconds or more.
Press the upper-left edge and the upper-right edge of the HG2F/2S/3F/4F screen simultaneously.
The Maintenance Screen is displayed.
2 Press System Mode.
The MICRO/I switches to system mode.
3
Press Debug.
4 Press Simulat'n.
HG2F HG2S
HG3F HG4F
MICRO/I
HG1F
Press and hold
3 or more seconds
MICRO/I
Maintenance
System Mode
Device Monitor
Adjust Back Light
If a password has been configured for the project data, the Enter Password screen will be displayed. Select
a user name and then enter a password. For details, refer to Chapter 23 “User Accounts and the Security
Function” on page 23-1.
Main Menu
ENG/JPN
IniƟal
Seƫng
Self
Diagnosis
System
InformaƟon
Clock Set
Debug
Run (Start)
Sat 11/01/2010 00:00:00
Main Menu
Simulat'n
Debug