IDEC High Performance Series - Manual (Page 657)

WindO/I-NV2 User’s Manual 10-145
9 Numerical Display
10
Data Displa
ys
For User 1, who is not included in the specified security group, Group A parts are not displayed.
If the Password Screen is now opened and a switch is made to User 2 of Group A, Group A parts are displayed.
■ Display with Arithmetic Operation
To apply arithmetic operations to values of devices and writing the results, select this check box and input the
arithmetic formula.
Example: To multiple the value of device when displayed by 60
Arithmetic Formulas
Arithmetic formulas can be specified by freely combining multiple kinds of data and operators in the following format.
• There is no limit on the number of data items or number of operators. However, the maximum number is 120
characters.
• Round brackets can be used.
Data
Open Password Screen,
enter password,
and switch to User2
Group A parts are
not displayed to User1
Group A parts are
displayed to User2
MICRO/I
130
MICRO/I MICRO/I
130
User1 User2
130
CAN
User Up Down
A B C D E F
G H I J K L
CLR
M N O P Q R
S T U V W X
ENT
Y Z 0 1 2 3
4 5 6 7 8 9
Password
Item Description
@
The device on which the arithmetic operation is performed is specified in the arithmetic formula. Only
1 device can be set for an arithmetic operation.
The device is as specified for Display Device under the General tab.
Value
Sets the constant values for the arithmetic formula.
The values that can be set depend on the data type selected using Data Format under the General
tab. For details, refer to Chapter 2 “1.2 Available Data” on page 2-2.
Device Specifies the bit device or word device for the arithmetic formula.
Host
MICRO/I
D0 1234
1234×60
Display value of
device
multiplied by 60
74040
Numerical Input
Destination Device: D0
Display with Arithmetic Operation: @*60
...(up to 120 characters)
Operator Data Data
Operator Data Data
to
Operator Data Operator Data Operator Data Operator Data