IDEC High Performance Series - Manual (Page 602)

6 Message Switching Display
10-90 WindO/I-NV2 User’s Manual
■ Trigger Device
Specifies the word device to use as the condition for switching messages.
Click to display the Device Address Settings dialog box. For the device address configuration procedure, refer
to Chapter 2 “5.1 Device Address Settings” on page 2-67.
Value: Switches the message to display according to the value of a device.
Example: When Value is selected and the values of device D 0 are allocated to the following messages.
Switches the message to display according to the value of the device.
0 :
1 :
2 :
Trigger device D0 value Msg0 Drying
Heating
Cooling
Msg1
Msg2
Message details
0
Message to display
1 2 3
Display Msg0 Action Display Msg1 Display Msg2 No message
Msg0 Msg1 Msg2
Trigger device D0 value
Drying Heating Cooling
If the value of device has no message
associated with it, display nothing.