Hg1f/2s, Hg2f, Hg3f/4f – IDEC High Performance Series User Manual
Page 1290
1 Functions and Connections
31-2
WindO/I-NV2 User’s Manual
●
HG1F/2S
Connect serial interface 2 on the MICRO/I and the serial port on the printer with a serial cable.
●
HG2F
Use either method below to make the connection.
• Connect the USB interface on the MICRO/I and the USB port on the printer with a USB cable.
• Connect serial interface 2 on the MICRO/I and the serial port on the printer with a serial cable.
●
HG3F/4F
Use either method below to make the connection.
• Connect serial interface 2 on the MICRO/I and the serial port on the printer with a serial cable.
• Connect the parallel interface on the MICRO/I and the parallel port on the printer with a parallel cable.
HG2S
HG1F
MICRO/I
Printer
Serial cable
To serial port
To serial interface 2
HG2F
MICRO/I
Printer
Serial cable
USB cable
To serial port
To serial interface 2
To USB port
To USB interface
Mini-A plug
B plug
Do not use a USB hub when connecting to the printer with a USB cable.
HG3F HG4F
MICRO/I
Printer
Parallel cable
Serial cable
To parallel port
To parallel interface
To serial port
To serial interface 2