IDEC High Performance Series - Manual (Page 402)

5 Key Button
8-78 WindO/I-NV2 User’s Manual
●
Trigger Condition Tab
The Trigger Condition tab is displayed in Advanced mode.
■ Input Condition
The Button is enabled and operational while the condition is satisfied. The Button is disabled and not operational
while the condition is not satisfied.
Example: When Trigger Type is While ON and Device is LM 0
While LM 0 is 0, the condition is not satisfied and the Button is not operational.
While LM 0 is 1, the condition is satisfied and the Button is operational.
Trigger Type: Selects the condition to enable the Button from the following.
Always enable: The Button is always enabled.
While ON: Enables the Button when the device value is 1.
LM0:
MICRO/I
0
LM0: 1
Button
Does not
operate
Button
Operates
Condition
Not
satisfied
Condition
Satisfied
Always enabled
Button state
1
0
Disabled Enabled Disabled Disabled Enabled Enabled
Device value
Button state