IDEC High Performance Series - Manual (Page 523)

WindO/I-NV2 User’s Manual 10-11
1 Numerical Input
10
Data Displa
ys
■ Display Numerical Value with “*” *2
Select this check box to display the entered value as * (asterisks).
Nothing is displayed if the value of device is 0 when this check box is selected and the Suppress Zeros check box is
selected on the General tab. When this check box is selected in entry mode, nothing is displayed until a value is
entered from the key buttons or keypad. If ENT is pressed with nothing displayed, 0 is written to the destination
device.
■ With Unit *2
Select this check box to display units or other characters at the end of a number. Displayed characters must be
registered in Text Manager. The displayed text color will be as set for Text Color under the Format tab.
*2 Advanced mode only
Text ID: Specifies the Text Manager ID No. (1 to 32000).
Click to display Text Manager.
Text: Displays the characters of the specified Text ID.
• The maximum number that can be displayed with this function is 4 characters. The fifth and subsequent
characters of a character string are not displayed. However, if Windows Font is set for the specified Text
ID characters all the characters are displayed.
• If a carriage return (CR) is included the characters after the CR are not displayed.