IDEC High Performance Series - Manual (Page 1284)

2 USB Flash Drives
30-40 WindO/I-NV2 User’s Manual
2.7 USB Popup Screen Function
The USB Popup Screen function displays a specific screen by simply inserting a USB flash drive in the MICRO/I.
This provides an easy way to display a message when the operator inserts a USB flash drive.
1 On the Configuration tab, in the System Setup group, click the Project.
The Project Settings dialog box appears.
2 On the USB Flash Drive tab, select the Open Popup Screen when USB Flash Drive is inserted check box.
3 Specify the Screen No. of the Popup Screen to display, and the Coordinates, then click OK.
For details, refer to Chapter 4 “3.11 USB Flash Drive Tab” on page 4-58.
4 Insert the USB flash drive into the MICRO/I.
HG3G HG2G-5F HG4G
USB flash drive
MICRO/I