IDEC High Performance Series - Manual (Page 633)

WindO/I-NV2 User’s Manual 10-121
8 Alarm Log Display
10
Data Displa
ys
■ First Alarm *1
An alarm that occurs in a state where no alarms have occurred is called the first alarm. Select the check boxes for the
operations to execute when the first alarm occurs.
■ Operate the Alarm on List directly *1
Select this check box to display the focus by pressing an alarm displayed on the list.
When an alarm is pressed with no focus displayed, the focus is displayed on that alarm.
When an alarm is pressed that does not have focus when the focus is displayed, the focus is moved to that alarm. The
focus is no longer displayed when an alarm with focus is pressed.
■ Alarm Log Settings
Displays the Alarm Log Settings dialog box.
*1 Advanced mode only
Display First Alarm to 1st line on List: Always displays the first alarm on the first line of the list.
Change the color of First Alarm: Changes the text color of the first alarm according to the First Alarm
Color setting. First Alarm Color is configured on the Format tab.