IDEC High Performance Series - Manual (Page 496)

2 Multi-State Lamps
9-16 WindO/I-NV2 User’s Manual
• Display a picture when in the OFF state. *1
*1 HG2G-S/-5S/-5F, HG3G/4G only
MICRO/I
External device
D0
bit15 bit0 bit3
D0= 0100
bit0 bit3
D0= 0001
bit0 bit3
D0= 0010
bit0 bit3
D0= 0000
bit0 bit3
OFF State: 0 State: 1 State: 2
The conditions to display the picture set by the OFF state *1 on the screen are as follows.
• Y is selected under Flash on the State tab and the trigger condition is not satisfied.
• Switching Method on the General tab is Bit, and the all bit are 0 or a bit not allocated a picture is 1.
• Switching Method on the General tab is Value, and the value of device is a number not allocated a
picture.