IDEC High Performance Series - Manual (Page 191)

WindO/I-NV2 User’s Manual 4-5
1 Creating and Manipulating WindO/I-NV2 Project Data
4
Project Set
tings
1.2 Opening Project Data
●
Opening project data
You can open project data that has already been created.
1 Click , then click to the right of Open, and then click WindO/I-NV2 Project.
The Open dialog box is displayed.
2 Select the file and click Open.
Next you will open a screen. For details, refer to Chapter 5 “2.2 Opening Screens” on page 5-3.
If a password has been configured for the project data, the Enter Password screen will be displayed.
HG2G-S/-5S/-5F, HG3G/4G: The password to enter varies based on the check box setting of the Use
Password to open a Project found under the Options tab in the
Security dialog box.
When this check box is checked, enter the password for Use Password
to open a Project.
When this check box is unchecked, enter the password for the user
account assigned to the Administrator security group.
HG1F/2F/2S/3F/4F: Enter the password for the user account assigned to the Administrator
security group.
For details, refer to Chapter 23 “User Accounts and the Security Function” on page 23-1.
Project data can also be opened by the following methods.
• Click , then click Open, and then select the project data in the displayed Open dialog box
• Click and then click project data on the Recent Projects list