IDEC High Performance Series - Manual (Page 1049)

WindO/I-NV2 User’s Manual 22-17
5 Restrictions
22
Multimedia Function
• When you have a movie file (.mp4) and a sound file (.WAV), you cannot play both of them at the same time.
• Movie files and sound files cannot be played while recording.
• Movie files cannot be played and video cannot be displayed while the Maintenance Screen is being displayed.
• If the zoom magnification for the movie file is greater than 2x, the zoom magnification is adjusted to 2x and the
movie is centered and displayed.
• If SIEMENS S7-MPI is selected in Host I/F Driver, the speed of the MICRO/I scan process decreases by playing
movie files and by displaying or recording video from video input.
• When using the Cyclic Script, movie file playback and displaying or recording video from video input may be
interrupted.
• If the MICRO/I Installation direction is set to Vertical installation, movie file playback and displayed video is
performed in the same direction as the Horizontal installation.
To play movie files on a Vertical installation MICRO/I, use movie files with the display orientation rotated to match
the installation direction.
• When using the event recording function, the event recording function is paused if you record with parts or play
movie files, so take note of the following.
- While recording with parts and while playing movie files, nothing is recorded if an event occurs.
- When data was recorded with a part, it takes approximately 1 second after the data is finished being saved to the
memory card until the event recording function resumes operating.
- When a movie file was played, it takes approximately 1 second from stopping playback until the event recording
function resumes operating.
• While data is being recorded after an event occurs with the event recording function and while recorded data is
being saved to the memory card, data cannot be recorded with parts and movie files cannot be played. Also, during
these situations, the value of HG special internal register LSD155-0 changes to 1. For details, refer to Chapter 32
“HG Special Registers (LSD)” on page 32-5.
5 Restrictions
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
The time to save data to the memory card varies based on the write speed of the memory card used.