IDEC High Performance Series - Manual (Page 806)

1 Overview
13-8 WindO/I-NV2 User’s Manual
Data Storage Amount
The maximum amount of data that can be saved in the data storage area is as follows.
When Not Saving Data to the Data Storage Area
Select No Store under Data in the Auto-Setup dialog box or in the Individual Settings dialog box.
Use this option to monitor a device state and display only detected active alarms on the Alarm List Display.
●
Deleting Data
The method to delete sampled data from the data storage area is as follows.
• On the Online tab in WindO/I-NV2, click the arrow under Clear, and click All or Alarm Log Data. For details,
refer to Chapter 24 “4 Clear” on page 24-26.
• For the HG2G-S/-5S/-5F and the HG3G/4G, in the System Mode, on the System Menu screen, press Initial
Setting, Initialize, Alarm Log in order.
For the HG1F/2F/2S/3F/4F, in the System Mode, on the System Menu screen, press Initial Setting, Initialize,
Alarm in order.
Model Maximum amount of data that can be saved in the data storage area
HG2G-S/-5S 5,520
HG2G-5F, HG3G/4G 11,660
HG1F/2F/2S/3F/4F 1,024
Alarm List Display
MICRO/I
Host
Voltage drop
Pg.
Up
Pg.
Dwn 0 1
Alarm occurred