IDEC High Performance Series - Manual (Page 1211)

WindO/I-NV2 User’s Manual 28-17
1 Project Transfer Function
28
Data T
ransf
er Func
tion
For the HG2F/3F/4F
1 Insert the CF card in the MICRO/I.
2 Press the upper-left edge and the upper-right edge of the MICRO/I screen simultaneously.
The maintenance screen is displayed.
3 Press System Mode.
MICRO/I switches to system mode.
4 Press Initial Setting.
HG2F HG3F HG4F
CF Card
MICRO/I
HG2F HG3F HG4F
MICRO/I
Maintenance
System Mode
Device Monitor
Adjust Back Light
When downloading a project configured with security to the MICRO/I, the password screen is displayed.
Select a user name and enter its password. For details, refer to Chapter 23 “User Accounts and the Security
Function” on page 23-1.
Main Menu
ENG/JPN
Initial
Setting
Self
Diagnosis
System
Information
Clock Set
Debug
Run (Start)
Thu 2/10/2000 06:54:10