IDEC High Performance Series - Manual (Page 318)

2 Picture
7-24 WindO/I-NV2 User’s Manual
2.1 Picture Configuration Procedure
This section describes the picture configuration procedure.
1 On the Home tab, in the Drawings group, click Picture.
The mouse cursor changes to (picture).
2 Click the location on the edit screen to place the picture.
Picture Manager is displayed.
3 Select a picture and click Select.
The selected picture is placed on the screen.
2 Picture
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
To change the picture that was placed on the screen, perform one of the following operations.
• Double click the picture to open the Properties dialog box, then click Browse
• Replace the picture in Picture Manager