IDEC High Performance Series - Manual (Page 1225)

WindO/I-NV2 User’s Manual 28-31
2 PLC Program Transfer Function
28
Data T
ransf
er Func
tion
10 Specify the MICRO/I communication port and PLC network number or station number, and then press YES.
The PLC program file upload starts.
When the upload finishes, the results are displayed.
11 Press Ack to close the screen.
You are returned to the top page of system mode.
YES NO
Copy This File ?
PLC.ZLD
Comm.I/F:
Network Number:
Communication port
Network number or
station number
0 0 0
SERIAL 1
“PLC.ZLD” is displayed in the confirmation message, but the PLC program file name after uploading is
“Model name_Port number_Station number_Year month day hours minutes seconds + File extension
(.ZLD)”.
When downloading a PLC program file to a PLC configured with a password, the PLC password screen is
displayed. Enter the password.
Upload PLC Program
Function
The following function completed
Result
Ack