IDEC High Performance Series - Manual (Page 140)

5 User Communication
3-38 WindO/I-NV2 User’s Manual
●
Transmission (TXD) Command
Constant (Character)
The character data is sent without being converted.
This can be configured only when TXD is selected in Command Type on the Command Settings dialog box, and
Constant (Character) is selected under Type on the Data Settings dialog box.
■ Data
Enter character data to be transmitted. The size of a single-byte character is one byte and that of a double-byte
character is two bytes.
Example: Constant (Character) for transmission command data
When the trigger condition is satisfied, the character data is transmitted in the following order.
HG2G-S/-5S/-5F, HG3G/4G: 1 to 1,500 bytes
HG1F/2F/2S/3F/4F: 1 to 200 bytes
Item Setting
Data 1234
1234
1
(31h)
Transmission data
Data
2
(32h)
3
(33h)
4
(34h)
Order of transmission
No
conversion