IDEC High Performance Series - Manual (Page 405)

WindO/I-NV2 User’s Manual 8-81
5 Key Button
8
Bu
tton
s
●
Options Tab
The Options tab is displayed in Advanced mode.
■ ON delay
Select this check box to use the ON delay function.
■ Security Groups
Security groups are a security function for restricting the display and operation of parts.
Time (x100 msec): Specify the length of time that the button must be held down before activation by selecting a
value from 0 to 600 (units of 10 ms).
The button activates after it is held down for a specified period of time.
Hold down for 3 secs.
MICRO/I MICRO/I
Button
Does not
operate
Button
Operates
This feature protects against mistaken operation by ensuring that the button will not be activated if touched
accidentally.
Setting the security group makes it possible to limit the display and operation in a similar way to using the
Trigger Condition tab.
Display: Selects the security group for which display of parts is restricted. (Default: None)
None: No security function is used.
Administrator, Operator, Reader: Three security groups are set up by default.
Click
to display the Security Group Settings dialog box. If you create a security group on the
Security Group Settings dialog box, you can select that created group. For details, refer to Chapter 23
“2.2 Adding and Editing Security Groups” on page 23-18.
Input: Selects the security group for which operation of parts is restricted. (Default: None)
None: No security function is used.
Administrator, Operator, Reader: Three security groups are set up by default.
Click
to display the Security Group Settings dialog box. If you create a security group on the
Security Group Settings dialog box, you can select that created group. For details, refer to Chapter 23
“2.2 Adding and Editing Security Groups” on page 23-18.
For details about security functions, refer to Chapter 23 “User Accounts and the Security Function” on page
23-1.