IDEC High Performance Series - Manual (Page 1207)

WindO/I-NV2 User’s Manual 28-13
1 Project Transfer Function
28
Data T
ransf
er Func
tion
9 Press Yes.
The project data download starts.
When the download is complete, you are returned to the top page of system mode.
●
Upload
For the HG2G-5F, HG3G/4G
1 Insert an SD memory card or USB flash drive in the MICRO/I.
2 Press the upper-left edge of the MICRO/I screen for three seconds or more.
The maintenance screen is displayed.
3 Press System Mode.
MICRO/I switches to system mode.
Copy Project from
CFcard to HG, OK?
CF Access Folder : HGDATA01
System Ver. : X.XX
Yes No
Menu Set. CF card From
CFcard
HG3G HG2G-5F HG4G
SD Memory Card MICRO/I
USB flash drive
HG3G HG2G-5F HG4G
Press and hold
3 or more seconds
MICRO/I
Maintenance
System Mode
Device Monitor
Adjust Brightness
When downloading a project configured with security to the MICRO/I, the password screen is displayed.
Select a user name and enter its password. For details, refer to Chapter 23 “User Accounts and the Security
Function” on page 23-1.