IDEC High Performance Series - Manual (Page 1201)

WindO/I-NV2 User’s Manual 28-7
1 Project Transfer Function
28
Data T
ransf
er Func
tion
1.5 Using the MICRO/I System Menu to Transfer Data
When using the system menu, the operating procedure depends on the model.
●
Download
For the HG2G-5F, HG3G/4G
1 Create a project file for project transfer (.ZNV) and save it on an SD memory card or USB flash drive.
For details, refer to “1.3 Converting Project Data for Transfer” on page 28-3.
2 Insert an SD memory card or USB flash drive in the MICRO/I.
3 Press the upper-left edge of the MICRO/I screen for three seconds or more.
The maintenance screen is now displayed.
4 Press System Mode.
MICRO/I switches to system mode.
HG3G HG2G-5F HG4G
SD Memory Card MICRO/I
USB flash drive
HG3G HG2G-5F HG4G
Press and hold
3 or more seconds
MICRO/I
Maintenance
System Mode
Device Monitor
Adjust Brightness
When downloading a project configured with security to the MICRO/I, the password screen is displayed.
Select a user name and enter its password. For details, refer to Chapter 23 “User Accounts and the Security
Function” on page 23-1.