IDEC High Performance Series User Manual
Page 1298
2 Internal MICRO/I Devices
32-6
WindO/I-NV2 User’s Manual
*2 HG2G-5F, HG3G/4G only
*4 HG2G-S/-5S/-5F, HG3G/4G only
*5 HG2G-S/-5S, HG1F/2F/2S only
*6 HG3F/4F only
HG Special Register
Function/Part
LSD17
Stores current time data from MICRO/I. “Minute” (2 BCD digits)
LSD18
Stores current time data from MICRO/I. “Second” (2 BCD digits)
LSD19
Stores current time data from MICRO/I. “Day-of-week” (1 BCD digit)
LSD20
When a value of “1” is written into this special register, the Internal clock in MICRO/I is updated
according to the data stored in LSD21-26. It automatically resets to “0” after the update.
LSD21
Write a “Year” value to store in the MICRO/I internal clock. (2 BCD digits)
LSD22
Stores set value for “Month” in MICRO/I internal clock. (2 BCD digits)
LSD23
Stores set value for “Day” in MICRO/I internal clock. (2 BCD digits)
LSD24
Stores set value for “Hour” in MICRO/I internal clock. (2 BCD digits)
LSD25
Stores set value for “Minute” in MICRO/I internal clock. (2 BCD digits)
LSD26
Stores set value for “Second” in MICRO/I internal clock. (2 BCD digits)
LSD27
Scan time Current value (msec.)
LSD28
Scan time Minimum value (msec.)
LSD29, 30
Reserved
LSD31
Stores the currently displayed screen number.
LSD32
Set a value ( in reference to a Base Screen number you want to switch to) and it will automatically
switch to a specified Base Screen number.
Note, after switching to a Base Screen, the value stored automatically resets to 0.
LSD33 to 37
Reserved
LSD38
Execution time of the Cyclic Script (Current value) (msec.)
LSD39
Execution time of the Cyclic Script (Maximum value) (msec.)
LSD40
Execution time of the Cyclic Script (Minimum value) (msec.)
LSD41
Reserved
LSD42
Memory Card error status
LSD43
Memory Card free memory capacity Lower word (CF Card: bytes, SD Memory Card: Kbytes)
LSD44
Memory Card free memory capacity Upper word (CF Card: bytes, SD Memory Card: Kbytes)
LSD45
Memory Card total memory capacity Lower word (CF Card: bytes, SD Memory Card: Kbytes)
LSD46
Memory Card total memory capacity Upper word (CF Card: bytes, SD Memory Card: Kbytes)
LSD47
Reserved (for Host I/F driver)
LSD48
Reserved
LSD49
Stores the O/I Link slave station number. (Read-only)
LSD50
The sequence value of the message number (or channel number if the alarm function is being
used) selected by the cursor in the Alarm List Display is stored.
A value of between 1 and 1024 (allocated using ((Block No. - 1) x 16 + bit position + 1)) is stored
for the number.
LSD51
Contrast level: 0 to 31
Backlight level: 0 or 31
Brightness level: -16 to 31
Appropriate level of contrast changes by individual difference of MICRO/I.
LSD52
The ID number of the script for which the error occurred.
LSD53
Script error status
LSD54
Reserved (for Script)
LSD55
Color brightness adjustment MICRO/I color brightness is adjusted in four increments.
0 - 7: Dark, 8 - 15: Slightly dark, 16 - 23: Slightly bright, 24 - 31: Bright